North Star M1146E User Manual download pdf (Page 3)

7. Install the wedge on the beam by inserting eight, hex head bolts, 82114,

through the wedge and the right keeper, as shown below. Tighten with

82115 (7/16” Nyloc nuts) to 70 ft-lbs. Repeat for the left side.

8. Hook up hydraulics and extend the cylinder out. Connect the cylinder to

the wedge using 82258 (7/16 x 2 ¼” SHCS bolt) and 82115 (7/16” Nyloc

nut).

9. If 4-way splitting is desired wings can be installed as shown above. Insert

five 82237 (1/2” nyloc nut) nuts into the hex cutout on the right wing.

Place the right wing on wedge. Insert 5 bolts, 82257 (1/2 x 2” SHCS

bolts) into left wing and through wedge. Tighten the bolts and nuts to 70

ft-lbs.

10. Install decals where shown on page 1.

1 2 3 4

No comments

North Star M1146E User Manual Page 3