North Star M157304E User Manual download pdf (Page 6)

II.) Assembly Instructions

A. 1. To spray chemical, insert the chemical injector into the

quick connect oulet of the pressure washer as shown.

2. Connect the clear hose to the chemical strainer and to

the inlet of the chemical injector. This is inside the base

unit on the 157303, chemical injector can remained

installed at all times. Have hose exit base as shown

below.

3. Install the pressure hose onto the chemical injector as

shown, for 157304. Install on quick connect outlet on

157303.

4. Connect the other end of the pressure hose to the spray

gun as shown.

5. Connect the lance extension to the spray gun and insert

the proper nozzle into the lance end.

6. Make sure all plumbing connections are tight.

Nozzle

Lance

Extension

Spray

Gun

Chemical

Injector

High Pressure

Hose

Chemical

Strainer

Clear

Hose

Quick Connect

Outlet

157304 only

7. Install four rubber feet onto base with four 1/4” x 3/4”

flange bolts and four flange nuts. Use the same bolts to install

cross members when installing the rubber feet.

FIG0235

RUBBER FEET

BRACE

Chemical Hose

Exit for 157303

1 2 3 4 5 6 7 8 9 10 11 ... 18 19

No comments

North Star M157304E User Manual Page 6