North Star M157304E User Manual download pdf (Page 7)

III.) Wiring Instructions

This pressure washer is shipped without a power cord and is

intended to be hard wired into your electrical system. The

following instructions will help you to hard wire this unit.

Electrical Requirements:

Item Number Circuit Rating

157303 115V/20A

157304 230V/30A

WARNING: Make sure to use a dedicated circuit that

includes a GFCI. Consult local electrical code for

connection requirements.

A 157304 is shown in the following steps, the 157303 gets

wired the exact same way.

Step 1: Using a 3/8” wrench, remove the roof and the top of

the electrical housing. (Front panel not shown for clairity.)

Step 2: Feed power cord through the strain relief nut on the

bottom of the unit into the electrical housing.

Step 3: Locate terminal block inside the electrical housing and

attach wires (like colors should be across from each other).

Step 4: Clamp cord in strain relief nut (thru the bottom of the

panel) by turning nut clockwise.

Step 5: Re-attach the top of the electrical housing and the

roof.

POWER SUPPLY CORD

OR CONDUIT

1 2 3 4 5 6 7 8 9 10 11 12 ... 18 19

No comments

North Star M157304E User Manual Page 7